For Furnace repair in Anoka MN, like us on Facebook! See what your neighbors think about our Furnace service in Coon Rapids MN on Google Reviews. To schedule your Heater installation in Blaine MN, just email us! Follow us on Twitter for updates on our Heater repair service in Blaine MN For Heating service in Anoka MN, visit us on Pinterest!
Call Air Comfort Heating & A/C, Inc. for great Furnace repair service in Anoka MN
24/7 EMERGENCY HVAC SERVICE! CALL NOW! (763) 753-6623
Call Air Comfort Heating & A/C, Inc. for great Furnace repair service in Anoka MN
24/7 EMERGENCY HVAC SERVICE! CALL NOW! (763) 753-6623

Operating & Maintaining Your Heat Pump

Operating and Maintaining Your Heat Pump

Proper operation of your heat pump will save energy. Do not set back the heat pump's thermostat if it causes the backup heating to come on; backup heating systems are usually more expensive to operate. Continuous indoor fan operation can degrade heat pump performance unless a high-efficiency, variable-speed fan motor is used. Operate the system on the "auto" fan setting on the thermostat.

Like all heating and cooling systems, proper maintenance is key to efficient operation. The difference between the energy consumption of a well-maintained heat pump and a severely neglected one ranges from 10%–25%.

Clean or change filters once a month or as needed, and maintain the system according to manufacturer's instructions. Dirty filters, coils, and fans reduce airflow through the system. Reduced airflow decreases system performance and can damage your system's compressor. Clean outdoor coils whenever they appear dirty; occasionally, turn off power to the fan and clean it; remove vegetation and clutter from around the outdoor unit. Clean the supply and return registers within your home, and straighten their fins if bent.

You should also have a professional technician service your heat pump at least every year. The technician can do the following:

  • Inspect ducts, filters, blower, and indoor coil for dirt and other obstructions
  • Diagnose and seal duct leakage
  • Verify adequate airflow by measurement
  • Verify correct refrigerant charge by measurement
  • Check for refrigerant leaks
  • Inspect electric terminals, and if necessary, clean and tighten connections, and apply nonconductive coating
  • Lubricate motors, and inspect belts for tightness and wear
  • Verify correct electric control, making sure that heating is locked out when the thermostat calls for cooling and vice versa
  • Verify correct thermostat operation.

U.S. Department of Energy

FILL OUT A FORM • OR • Call Us Today (763) 753-6623
Get In Touch
 
ADDRESS:   19170 Jasper St NW,
Anoka, MN 55303
PHONE:   (763) 753-6623
24 Hour Emergency Service!
We service all brands of equipment
ADDRESS:   19170 Jasper St NW
Anoka, MN 55303

PHONE:   (763) 753-6623
24 Hour Emergency Service!
We service all brands of equipment
Home   |   Email Us   |   Schedule Service   |   FINANCING OPTIONS   |   Ask a Tech   |   Privacy Policy